KKE Pro 8000 — Adaptive Correction Compound
KKE Pro 8000 features Adaptive Abrasive Technology — it starts with cutting power and automatically transitions to a fine finish as you work. One step replaces a traditional 3-step correction process. PTFE enhanced.
Salient features
- Adaptive Abrasive Technology — Cuts then finishes automatically
- One Step Replaces a 3-Step Correction Process
- PTFE Enhanced Surface Protection
- Mirror-Capable Finish in a Single Step
- Dust-Free with Extended Working Time
- Over 90% biodegradable and natural mineral content
Product description
KKE Pro 8000 — Adaptive Correction Compound
The future of paint correction in one bottle. The KKE Pro 8000 features Adaptive Abrasive Technology — abrasive particles that start at cutting size and progressively break down to sub-micron finishing particles as you work the compound. The result: a complete correction from defect removal to mirror finish in a single step.
How Adaptive Abrasive Technology Works
Traditional correction requires three separate products: a cutting compound, a polishing compound, and a finishing compound. Each step requires a pad change, product change, and cleanup. The Pro 8000 eliminates all of that. Start with medium pressure — the compound cuts. As you continue working, the abrasive particles break down to finer and finer sizes. Reduce pressure, and the compound transitions from cutting to polishing to finishing. When the residue turns clear, you're done. One product. One pad. One step.
"One Step Replaces Three" — What That Actually Means
PTFE Protection Throughout
Dust-Free, Extended Working Time
The formula is built to minimise dust thrown from the pad during machine work and to remain workable long enough to properly finish a full panel — important for a compound meant to carry more of the correction workload than a single-stage product normally would.
Choose Your Formula
Standard P8000 suits general professional correction work. For body shops, pre-repaint prep, or any job where silicone contamination is a concern, KKE P8000 SF delivers the same adaptive correction in a 100% silicone-free formula.
Key Features
- Adaptive Abrasive Technology — Particles start at 5µm cutting size and break down to sub-micron finishing size during use
- One Step Correction — Replaces the traditional cut → polish → finish workflow
- PTFE Enhanced — Fluoropolymer protection for lasting slickness
- Bonding Silicone — Durable gloss that survives multiple washes
- Mirror-Capable — Achieves show-car finish in a single application
- Dust-Free, Extended Working Time — Work until the compound turns clear
- Over 90% biodegradable and natural mineral content
Application Steps
Confirm the panel has been through P6000 (or P4000 first, if defects were heavy)
Apply a moderate amount to a fine-cut foam pad
Work at low speed initially, then at machine speed in overlapping passes
Continue working as the compound adapts and refines, until it hazes
Wipe clean with a microfiber towel and inspect under light
Proceed to P9500 for final mirror finishing
Specifications
| Appearance | White cream, non-settling |
|---|---|
| Cut Rate | ★★★★☆ (4/5) — diminishing by design |
| Finish Quality | ★★★★★ (5/5) — mirror capable |
| Abrasive | Adaptive — 5µm → <0.5µm |
| PTFE | Yes |
| Silicone | Yes — bonding type |
| VOC | < 15% |
| Shelf Life | 24 months |
| Size | 500 ml |
Product information
Customer reviews
Good compound for correction. Ek hi product se kaafi work ho jata hai.
Cutting is good and finish also not rough. Regular detailing ke liye useful.
Decent all round product. Correct pad use karo toh result much better hai.
Product acha hai for medium correction. Zyada dusting nahi hua while using.
Swirl marks ke liye acha result mila. Paint finishing step ke liye ready ho gaya.