HIGH pH CAR WASH SHAMPOO

Oil film and greasy road grime need alkaline cleaning power. KKE High pH Car Wash Shampoo is a concentrated alkaline shampoo for automatic car wash systems, designed to break down oil and grease quickly.

Alkaline cleaners are best at lifting oil film and grease, while acidic (low pH) cleaners are best at removing mineral dirt such as silica. Many operators run a two-step wash — KKE Low pH Shampoo first, followed by this High pH Shampoo — though the order is a matter of preference and requirement.

• Strong oil and grease removal for a thorough clean.
• Low cost per wash — dilute 300 to 400 times or more.
• Fits your process — use alone or in a two-step programme with KKE Low pH Shampoo.

For automatic vehicle wash systems only, on equipment designed to handle such shampoos — at car wash centres, dealerships and service stations. Not for manual handling.

1. Set your automatic dosing system to dilute 1 part shampoo in 300 to 400 parts of water, or more, as per cleaning and foaming requirements.
2. Apply through the automatic wash system, after the low pH stage if you run a two-step wash.
3. Rinse thoroughly.

For automatic vehicle wash systems only; do not handle manually. Use adequate protection for eyes, mouth, nose and skin, and refer to the SDS before handling. Harmful if taken internally. Wash all contacted skin and eyes with plenty of water; if irritation persists, consult a physician. If swallowed, do not induce vomiting; give water and get medical attention. Keep out of reach of children.