ZAP TFR-64 (Pre Wash Chemical)
KKE ZAP TFR-64 is a pre-wash chemical and traffic film remover (TFR) concentrate for cars, trucks and buses. Used as a pre wash before the main shampoo wash, it loosens road film, grime and diesel soot in 1–3 minutes so they rinse off easily with a pressure washer. Dilute 1:50 to 1:100 with water.
Salient features
- Pre-Wash Chemical — Removes road film, grime and diesel soot before the main wash.
- For Cars, Trucks & Buses — Pre-wash for passenger cars and commercial vehicles.
- Fast Acting — Works in 1–3 minutes before rinsing.
- Economical Concentrate — 1 part in 50 to 100 parts of water.
- Easy Application — Foam lance, pump sprayer or low-pressure applicator.
- Made in India — Manufactured by KKE Chemicals Pvt. Ltd., Nagpur.
Product description
KKE Auto Car Wash Drying Agent – Faster, Better Drying for Automatic Car Washes
A clean car is only half the job — it also has to leave the wash dry. KKE Auto Car Wash Drying Agent is a professional concentrate for automatic car wash systems that helps your blowers do exactly that. Added as the last step before the blower stage, it changes the way water behaves on the vehicle so it can be cleared quickly and evenly.
Why a Drying Agent Matters
After the final rinse, water clings to the paint, glass and trim as small beads. Blowers alone struggle to move these beads, so vehicles often leave the wash with water still on the surface and need to be wiped by hand.
KKE Auto Car Wash Drying Agent reduces the surface tension of the rinse water and stops it from forming beads on the vehicle. Instead of holding on, the water is easily pushed off by the air from the blowers — increasing blower efficiency and giving a better, more even dry.
Benefits for Your Car Wash
- Drier vehicles at the exit — less water left on the paint and glass after the blowers.
- More efficient blowers — water that does not bead is easier for the dryers to remove.
- Less hand drying — reduces the need for staff to wipe down vehicles after the wash.
- Low cost per wash — a highly concentrated formula, used at 1:200 to 1:300.
- Easy to dose — works with the dosing system of your automatic car wash.
Where to Use
Designed for automatic car wash systems, including tunnel washes and in-bay (rollover) car washes at car wash centres, service stations and fleet washing facilities.
How to Use
- Dilute 1 part KKE Auto Car Wash Drying Agent in 200 to 300 parts of water, or set your car wash dosing system to this ratio.
- Apply the solution to the vehicle just before the blower stage.
- Run the blowers to remove the water from the vehicle surface.
Safety & Handling
Harmful if taken internally. In case of contact, wash skin and eyes with plenty of water; if irritation persists, consult a physician. Keep out of reach of children.
Product information
Customer reviews
No reviews yet — be the first to write one.