KKE Auto 2000
KKE Auto 2000 is a medium-grade polish that refines the surface left behind by heavy cutting, clearing fine haze, holograms, and micro-marring to bring out a deep, glossy finish — the final step before wax or sealant.
Salient features
- Medium-Cut Refining Formula — Removes fine swirls, buffer haze, and holograms left by heavier compounding
- DA & Rotary Polisher Compatible — Works with foam or wool polishing pads at finishing speeds
- High-Gloss, Low-Dusting Finish — Breaks down to a fine polish that wipes off clean with minimal dust
- Restores Depth & Clarity — Brings out reflective, mirror-like gloss rather than just a temporary shine
- Stage 2 of a Two-Step System — Designed to follow directly after KKE Auto 1000
- Prepares Paint for Protection — Leaves a clean, receptive surface for wax, sealant, or ceramic coating to bond to
- Metal Tin Packaging — Easy product pick-up on a finishing pad and long shelf life
- Workshop & DIY Ready — Suited to both professional detailing bays and home garage correction work
Product description
KKE Auto 2000 – The Finishing Step That Brings Out the Shine
The product is designed to pick up exactly where heavy cutting leaves off. Once Auto 1000 has leveled the major defects in the clear coat, the surface is technically corrected but not yet refined — fine marring, buffer trails, and holograms from the cutting stage can still sit on the paint under direct light. Auto 2000 exists to erase that layer of imperfection and turn a "corrected" panel into a genuinely finished one.
Medium Abrasion for Maximum Clarity
"Medium Polish" describes both the abrasive grade and the intent — fine enough to avoid re-marring a panel that's already been leveled, but active enough to remove the haze and hairline marks a heavy-cut compound leaves behind. The result is a surface with real optical clarity and depth, not just a glossy look from oils or fillers sitting on top.
Smooth Machine Application
Auto 2000 is formulated to be worked with a dual-action or rotary polisher and a finishing-grade foam or wool pad, breaking down smoothly across the panel and hazing predictably as the polishing action completes — giving a clear visual cue that the pass is done.
<p>Low-Dust, Easy Wipe-Off</p>
Unlike coarser compounds, Auto 2000 is built to minimise dusting during machine work and to wipe away cleanly with a soft microfiber towel, leaving no greasy residue or streaking behind — just a clear, glass-like finish ready for inspection.
Stage Two of the KKE Two-Step System, and a Clean Base for Protection
As the second half of KKE's two-step correction process, Auto 2000 is the step that actually delivers the "after" result a customer sees. Just as importantly, the polished, marring-free surface it leaves behind is the ideal base for a wax, paint sealant, or ceramic coating to bond to — helping any protection product applied afterward perform and last as intended.
Application Steps
Confirm the panel has already been cut with KKE Auto 1000 and wiped free of compound residue
Apply a light, even amount of polish to a clean finishing pad (foam or wool)
Spread the product across the panel at low speed before increasing to working speed
Work in overlapping passes until the product hazes and becomes difficult to move further
Wipe the panel clean with a clean, soft microfiber towel and inspect the gloss under direct or LED light
Proceed to wax, sealant, or ceramic coating application once the full vehicle is polished
Product information
Customer reviews
No reviews yet — be the first to write one.