Drubber- Tyre And Dashboard Polish for Car | Non Oily | Long Lasting | Pleasant Smelling
KKE Drubber Tyre & Dashboard Polish is a non-oily, quick-drying water-based polish that delivers a rich, professional finish on tyres, dashboards, and bumpers — all from one bottle. Its advanced natural wax blend resists dust, UV, and rain for up to 7 days of deep black tyre shine, while leaving interior surfaces with a clean satin feel and a subtle fresh fragrance.
Salient features
- 7-Day Tyre Blackness: Restores deep, rich black to tyre sidewalls — advanced silicone bonding grips the rubber so the finish lasts up to 7 days even through rain and highway driving.
- Non-Oily, Satin-Smooth Finish: Dries clean and touch-dry within minutes — no greasy residue, no sticky film, no sunlight glare on your dashboard.
- Anti-Dust Technology: Built-in anti-static agents prevent static charge buildup, so treated surfaces repel fine dust particles instead of attracting them.
- One Polish, Three Surfaces: Tyres, dashboards, and bumpers — consistent, professional finish from a single bottle, saving you time and money.
- Premium Natural Wax Blend: Enriched with Carnauba Wax and Beeswax for a flexible, water-resistant, UV-protective film that outperforms standard silicone sprays.
- Extreme Heat Performance: High-melting-point wax system stays hard at 60°C+ surface temperatures — ideal for Indian summers and Gulf-region heat.
- Quick-Drying Formula: Water-based with natural citrus-derived drying agents — apply, wipe, and drive in minutes. No long wait times.
- Eco-Friendly Formula: Over 90% biodegradable ingredients, no petroleum solvents — a responsible choice for everyday detailing.
- Pleasant Fresh Fragrance: Subtle fruity scent lifts the cabin atmosphere without being overpowering.
- Matte or Glossy Finish — Your Choice: Wipe off excess for a refined matte look; layer on more product for a deep, wet-look gloss.
Product description
KKE Drubber Tyre & Dashboard Polish is the one bottle that takes care of your car's three most-visible surfaces — tyre sidewalls on the outside, and the dashboard and bumpers on the inside and out. Non-oily, long-lasting, and genuinely pleasant to use, it's the polish you'll actually reach for every week.
The Non-Oily Difference
Most dashboard polishes leave a tacky, oily layer — fingers stick, dust sticks, and the surface slowly turns into a grime magnet. Drubber is formulated to be completely non-oily. Its water-based, natural wax blend dries to a clean, satin-smooth finish that looks rich and feels clean to the touch — not coated. No sunlight glare, no fingerprint smudges, no slippery film.
7-Day Tyre Blackness — Rain or Shine
Ordinary tyre dressings sit on the surface and wash off with the first puddle. Drubber's advanced silicone bonding technology grips the rubber, while a premium Carnauba and Beeswax overcoat seals the finish against water, UV rays, and road grime. The result is a deep, professional black that holds for up to 7 days of daily driving.
Anti-Dust Technology for Dashboards & Trim
Drubber's built-in anti-static agents neutralise the static charge that pulls fine dust onto dashboard surfaces. The ultra-smooth surface film it leaves behind gives dust particles almost nothing to cling to — tested in 40°C+ heat, off-road dust, and the dry climates of India and the GCC region.
One Polish, Three Surfaces
- Tyres — deep black, long-lasting, professional wet look with rain resistance.
- Dashboard — rich satin appearance, anti-dust, non-oily, safe for enclosed cabins.
- Bumpers & plastic trim — restores faded plastic to its original colour and finish.
It also works on door trims, rubber seals, plastic fenders, and vinyl surfaces — anywhere you need a clean, finished look.
How to Use - Directions
Tyre Polish
- Clean the tyres thoroughly to remove dirt, grime, and debris (KKE APC or warm soapy water works well).
- Once clean and dry, apply a small amount of Drubber to a cloth or sponge.
- Rub onto the tyre sidewall in a circular motion, covering the entire surface.
- Allow the polish to sit for a few minutes to bond with the rubber.
- For a matte finish: wipe off any excess with a microfiber towel.
- For a glossy finish: apply an additional light layer and leave to set.
Dashboard & Bumpers
- Wipe the surface clean of dust and dirt first.
- Spray Drubber lightly onto a clean microfiber cloth.
- Wipe in long, even strokes across the surface.
- Buff lightly for a slightly less reflective finish, or leave for maximum shine.
- Tip: Always apply to cool surfaces in the shade — hot dashboards can cause uneven setting.
Extreme Heat & Eco-Friendly Formula
Drubber's high-melting-point natural wax system stays hard even when bumper surfaces reach 60°C+ in direct sun — it won't melt, drip, or turn tacky in peak summer conditions. The water-based formula contains over 90% biodegradable, naturally derived ingredients with no petroleum solvents, making it a responsible everyday choice for both home detailers and professional workshops.
Product information
Customer reviews
My staff tried it first and feedback was mostly good. dashboard looks clean not oily. It is not magic product, need proper cloth/pad and wipe extra product, then result looks clean.
Quick review: spreads easily. Product easy hai, lekin let it dry few minutes.
Used one time only but result good. satin finish comes nice.
Used on few cars now, result is consistent. no heavy glare on dashboard. Happy with the product.
No major problem.. tyre and plastic trim both look good.
Ok la, does the job. dashboard looks clean not oily.
no heavy glare on dashboard. Will buy again maybe.
We used it on SUV and sedan both. no heavy glare on dashboard. For quick service it is ok, for premium job we take more time and then result comes better.
Pretty good product. satin finish comes nice.
Worked better than expected, black trim looks fresh.