STEAM CLEANER DR100 - DR112
- 180°C steam temperature: Removes tough grime and sanitises surfaces — without chemicals.
- 10 bar maximum pressure (8 bar working): Strong steam output reaches into hard-to-clean areas.
- 15-litre boiler: Extended cleaning sessions without frequent refills.
- Eco-friendly: 0.25 L/min water consumption — minimal water use, no harsh chemicals.
- 5-minute preheat: 12 kW heater takes the machine from cold to working in 5 minutes.
About this item
- 180°C steam temperature:
- Removes tough grime and sanitises surfaces — without chemicals.
- 10 bar maximum pressure (8 bar working):
- Strong steam output reaches into hard-to-clean areas.
- 15-litre boiler:
- Extended cleaning sessions without frequent refills.
- Eco-friendly:
- 0.25 L/min water consumption — minimal water use, no harsh chemicals.
- 5-minute preheat:
- 12 kW heater takes the machine from cold to working in 5 minutes.
| Country of Origin | India |
|---|
Product description
The KKE DR112 Steam Cleaner is the professional-grade machine for cleaning operations that need real heat, real pressure, and the capacity to run through a serious workday. 180°C steam, 10 bar peak pressure, a 15-litre boiler, and a 12 kW heater that takes the unit from cold to ready in five minutes.
Why steam cleaning beats chemical cleaning
High-temperature pressurised steam reaches into porous surfaces (fabric, upholstery, grouting) and around three-dimensional features (engine bays, dashboards, ventilation) where spray-and-wipe simply can't penetrate. The heat lifts dirt, the pressure dislodges it, and the result is surfaces that are not just visually clean but chemically sanitised — without using chemical cleaners.
Key features
- Powerful steam cleaning — 180°C steam temperature handles tough grime; 10 bar peak pressure (8 bar working) drives the steam into hard-to-reach areas.
- Large boiler capacity — the 15-litre boiler runs extended sessions without frequent refilling.
- Quick heating time — 12 kW heater preheats the unit in just 5 minutes from cold, minimising downtime.
- Eco-friendly operation — uses only 0.25 L/min of water and eliminates the need for harsh chemicals.
- Built-in safety — overheat protection, pressure relief valve, and low-water cut-off prevent damage.
Where the DR112 works
- Professional car detailing — interior, exterior, engine bay; sanitises while cleaning.
- Workshops and industrial cleaning — equipment, surfaces, machinery.
- Healthcare and hospitality — chemical-free sanitisation for sensitive environments.
- Food processing — no chemical residue, suitable for surfaces in food-contact areas.
- Commercial cleaning teams — capacity and reliability for cleaning at scale.
Why 0.25 L/min matters
Water-based cleaning can use enormous amounts of water — bucket-and-mop, pressure-washing, even some steam cleaners. The DR112 uses only 0.25 L/min, which means a 15-litre boiler delivers a full hour of continuous cleaning before needing a refill. Eco-friendly, lower utility cost, and practical in environments where water consumption matters.
For exact electrical requirements, included accessories, and DR100-series compatibility, refer to the official KKE DR112 datasheet or get in touch with the KKE team.
Customer reviews
No reviews yet — be the first to write one.